Ribbed container

A solid wall with vertical ribs all round, rounded corners and bottom edge, compartments inside.

Randomise the shape and compartments too

Quick start

Shape

Colour (preview)

Outer size (over the ribs)

Length mm

Width mm

Height mm

Length and width up to 256 mm: the bed of a typical printer (X1C, P1, A1).

Compartments

Columns

Compartments per column

Divider height mm

Ribs

Swing mm

Waves

Angle to the bottom °

Rib depth mm

Rib thickness mm

Rib spacing mm

Advanced

Corner radius mm

Corners seen from above and the bottom edge, measured over the ribs.

Wall thickness mm

Bottom thickness mm

Divider thickness mm

With a 0.4 nozzle: a 1.6 mm wall is 4 lines, a 1 mm divider 2 lines (or set 0.8 or 1.2).

Left drag — rotate • Right drag — pan • Scroll — zoom

Download

Print with the bottom on the bed, without supports: the lowest ~3 mm of the ribs have a flat underside and stick out at most ~1.3 mm. With compartments do not use vase mode (spiral vase): the dividers are a second path in each layer.

Personal licence, free: print for yourself, your family and friends, gifts included. Selling prints requires a commercial licence. Do not pass the file on; share the link to the designer instead. Full terms · Privacy

🐞 Something not working? Report a bug or an idea

3MF in Bambu Studio / Orca: the “geometry data only” message when opening the file is normal, click OK.

Found it useful? Buy me a coffee